Printing ribbon is not installed

In addition, there is a need to remind you note is a frame of built-in two gear must be the ribbon with, but also to ensure that keep parallel with them, or else gear to move the ribbon will move to the ribbon shift phenomenon, finally will jam the gear to the normal ribbon cannot be turned. When, in accordance with the above method after the ribbon is installed, we must also be in accordance with the original installation method will print reinstall back to printer, finally will be the top of the printer cover again in situ, so the ribbon change process even over.
Printing ribbon is not installed, replace, can ensure ideal printing effect, we must be the same with toner or cartridge protection to protect the good ribbon, to both improve the print quality and prolonging the service life of the ribbon. Of course, to protect the ribbon, some appropriate skills must be mastered, it's not some details of the following skills, will make everyone get it!
To familiar with the paper thickness regulator, to ensure that the print head and the distance from the surface of the printing paper always are in the right. Under normal circumstances, when the printer is using a new ribbon, that we can by adjusting the thickness of the paper regulator, the distance to the print head and paper surface slightly widened, so that you can avoid printed handwriting effect is too strong, which can effectively ensure the quality of printing; If printing ribbon, have been used for a long time, and print the current page text seems to have less clear than before, so we can try to adjust the paper thickness regulator, the distance to the print head and paper surface slightly closer and so can the ribbon "potential" dig out as much as possible. Under normal circumstances, we are adjusting the paper thickness regulator, should be to ensure that the printing effect can meet our needs under the premise of fully follow the principle of can is big. In other words this time, stylus printer can't completely quit the historical stage, and in ink jet printers and laser printers a dime today, instead of the role and status of the stylus printer appears more important and highlighted.

The thermal transfer ribbon type

To adapt to the different was printed materials and durability requirements, thermal transfer ribbons according to the coating materials can be divided into the wax, wax / resin mixture base, resin three.

A) wax: usually has a high density, the degree of Gao Min, used paper labels, printingeffect is good, the cost of economic.

Universal type wax based thermal transfer ribbon is applicable to most of the thermal transfer printer, in the case of low power consumption, high sensitivity can still achievethe ribbon printing density and definition of excellent print speed of up to 200mm/s.Heat resistance: 100 DEG C, print material: coated paper, coated paper, the melting point of 65 DEG C. Enhanced wax based thermal transfer ribbon print speed of up to 250mm/s. The melting point of 80 DEG C.

B) mixed base: both high-quality printing effect and durability, wide application, goodprice effect.

Wax / tree mixed base ribbon with Gao Min sensibility: consumption, delay the printhead life. Heat resistance: 100 DEG C, the printing speed: 250mm /s, print material: coated paper, coated paper, PVC, PET, PE, PP, melting point of 75 DEG C. Side pressure enhanced wax / tree mixed base ribbon is applicable to edge IBM printer ribbon printer arecompatible with many label paper, and has anti fouling characteristics of scratch. Printspeed: 300mm /s, the melting point of 80 DEG C.

C) resin based: the most durable, abrasion resistance, heat resistance, corrosion resistance, some formula can prevent steam pressure, some were able to washing ordry cleaning

Enhanced resin thermal transfer ribbon is suitable for flat TTR printer ribbon print head, in the case of low power consumption, print speed of up to 200mm/s. print resolution up to 200DPIto 300DPI. Heat resistance: 100 DEG C, the printing speed: 200mm/s, print materials: PVC, PET, PE, PP, melting point of 80 DEG C. Side pressure reinforced resin ribbonis applicable to edge type printer. In the case of low power consumption, unique back coating technology, make the printing more flexible and easy, and even do a 90 degree rotation printing. Heat resistance: 180 DEG C, the printing speed: 200mm/s,melting point of 80 DEG C: